Summer Starts Here - Save up to 70%
Curt T-Connector Vehicle Wiring Harness Installation - 2017 Nissan Quest- Video
Today on our 2017 Nissan Quest, we're going to be taking a look at and showing you how to install the Curt T-connector vehicle wiring harness with a four-pole flat trailer connector. Has to be part number C56342. So here's what our wiring's going to look like once we have it installed. It is designed to stay on the outside of the vehicle at all times. So we can have it by our hitch whenever you get ready to hook up. It is going to provide us the four-pole flat trailer connector. more
1/16/2019 12:17:37 PM
Tekonsha T-One Vehicle Wiring Harness Installation - 2013 Nissan Quest- Video
Speaker 1: Today in our 2013 Nissan Quest we're going to be taking a look at and showing you how to install the Tekonsha T-One vehicle wiring harness with four pole flat trailer connector, part number 118547. Speaker 2: This is what our wiring looks like when it's installed. It's going to give you all the proper lighting functions for your trailer. Your running lights, your brake lights, both turn signals and your ground. This will be a custom fit vehicle wiring so it's going to plug directly into your factory wiring coming off the back of your taillights. It's also going to come with an attached dust cap. more
6/4/2018 1:52:24 PM
Trailer Wiring Harness Installation - 2015 Nissan Quest- Video
Today on our 215 Nissan Quest, we're going to review and install the Curt custom fit vehicle wiring harness with 4 pole flat trailer connector, part number C56137. Here's what our 4 flat connectors is going to look like once it's installed. A 4 flat trailer connector copies the basic running turn and brake signal functions from the vehicle and sends them to the trailer or accessory. The 4 flat connector is pretty standard across the industry and fits a variety of applications. Let's go ahead and show you how to install it. Now, to begin our install we're going to open the rear hatch. We need to remove both of the manufacture tail light assemblies. Now, to remove the tail light assemblies we'll start by removing the 2 fasteners that secure it. more
7/14/2015 11:58:14 AM
Trailer Wiring Harness Installation - 2007 Nissan Quest- Video
Today on this 2007 Nissan Quest van, we will be installing wiring harness part number 118469. Okay, we are inside the rear cargo area of the Nissan Quest van here and we are going to go ahead and point out the locations for our wiring harness, inside the interior of the van, behind these panels on both the driver and passenger sides as well. To gain access to those, we are going to need to go ahead and remove some of the paneling and this rear threshold plate as well. And if you have one of the storage compartments here at the bottom, we are going to go ahead and need to remove that as well. These are the rear threshold plates overlapping the two interior panels here. We are going to start by removing it. There are push rivets located along the back section here of this threshold plate that need to be released in order to get this guy off here. So what we are going to do is grab the bottom, and there are actually clips back here as well. And just start prying away until you here them release. 1:00 more
3/17/2010 4:59:54 AM
Filter Videos
Filter Videos
